Solar -

Why is Zinc Flake Coating Important ?

DURING THE DESIGN OF EVERYTHING FROM MECHANICAL ASSEMBLIES TO BUILDINGS, CORROSION PROTECTION IS A KEY CONSIDERATION.
EVEN THE SMALLEST COMPONENTS, SUCH AS NUTS AND BOLTS, MUST BE ADEQUATELY PROTECTED FROM CORROSION. OTHERWISE, THE RISK OF COMPROMISING THE INTEGRITY OF THE ENTIRE SYSTEM OR STRUCTURE.
ZINC FLAKE COATING (GEOMET®) IS AN IDEAL SOLUTION FOR THESE APPLICATIONS.
BECAUSE THE FILM IS EXTREMELY THIN-ONLY ABOUT 8 Microns – IT WONT NEGATIVELY AFFECT THE OPTIMAL FIT BETWEEN BOLTS AND NUTS

ZINC FLAKE COATING (GEOMET®) coating film has a silver-metallic look. Layers of metal flakes are connected with one another through the use of a special inorganic binder.
2C2B is the standard manufacturing process

ADVANTAGES OF ZINC FLAKE COATING (GEOMET®)

Non – pollution, environmentally responsible GEOMET® is a water-based coating technology that is completely free from chromium.
Outstanding resistance to the salt spray test and cyclic corrosion test.
Superb resistance to heat and corrosion.

Superior prevention of galvanic corrosion of aluminum.
No concern for hydrogen embrittlement.
Excellent coating properties.
UV Resistance & Fluid Resistance

APPLICATIONS

AUTOMOTIVE

INFRA- STRUCTURES

OFFSHORES

TRUCKS

SOLOR POWER

RAILWAYS

WIND POWER

Zinc Flake Coating Can Play Important Role In Solar Panel Fitment

Due to Corrosion, solar panel fitment can corrode over the years, as it placed in the outdoors, where it’s limit will be tested. zinc flake coating can overcome with the problem of corrosion

Benefits Of Zinc Flake Coating

Lower The Maintenance Cost
Rust & Corrosion Prevention
No Hydrogen Embrittlement.
UV Resistance
Fluid Resistance
SST LIFE (720 ̴1500Hrs Without Red Rust)

Environmental Friendly
Reduce Scrap
Resistant To Extreme Temperatures
No Warm-loosening Torque
Completely Chrome-free
No More Change Of Parts Due To Corrosion.

INDIA LOSES AROUND 5-7% OF ITS GROSS DOMESTIC PRODUCT (GDP) EVERY YEAR DUE TO CORROSION.

THE FINANCIAL LOSS OF THE NATION CAN BE CONTROLLED BY USING “ZINC FLAKE COATING”

FRICTION COEFFICIENT STABILIZERS

Zinc Flake Coating (GEOMET®) includes PLUS®SERIES coating solutions used as overcoating for

Torque Control
Enhanced Corrosion Resistance.
Improved Resistance To Galvanic Corrosion

TECHNO SHINE SPECIALIZES IN ZINC FLAKE COATING THAT DELIVER THE HIGHEST LEVELS OF CORROSION PROTECTION FOR THE PARTS WHERE PROTECTION IS NEEDED THE MOST

Details	Zinc Flake Coating	Hot Dip Galvanizing	Zinc Plating
LIFE AS PER ASTM B117	720 to 1500 Hrs	500 to 800 Hrs	80 to 250 Hrs
Coating Thickness	8 to 15 Microns	50 to 100 Microns.	8 to 15 Microns
COF	COF can be controlled in narrow range from 0.08 – 0.25	No controlled COF	No controlled COF or Plated Surface
UV Resistance	Resistance to UV	Poor UV Resistance	Poor UV Resistance
Fluid Resistance	Resistance to Fluid	Poor Fluid Resistance	Poor Fluid Resistance
Heat Resistance	> 355 °C	> 200 °C	> 200 °C
Suitability For Heat Treated Steels	Suitable	Not Suitable	Not Suitable For Hardened Parts
Coating hardness	Better Coating Hardness	Less Coating Hardness	Better
Compatibility For Top Coats	Compatible with most of Top Coats	Not compatible with Top Coats	Not compatible with Top Coats
Compliance with Environmental Standards	Meet with all standards	Limited compliance with standards	Limited compliance with standards
Environmental Impact	Negligible pollution during processing	High pollution during processing	High pollution during processing